SOLVED: My 2002 honda has a transmission problem went to

Detail: My 2002 honda has a transmission problem went to autozone to check on there computer it came up with p1750 code thought it was low fluid but i added fluid and it did not help the check eng light is still on and now the green light around the Drive is blinking and it won't change gears.
Detail Question SOLVED: My 2002 honda has a transmission problem went to

Solution: If I am not mistaken isn't that a shift solenoid code. If it is a shift solenoid code you will need to service the tranny and have it replaced. You can also check and see it there are any service bulletins or recalls on the tranny system through your local dealer. , Dear Williammoody, I saw your advice to terry69jam on Sep 26, 2009. I have the same error code p1750 which shows up as "Mechanical Problem in Hydraulic Control System of A/T Clutch Pressure Control Solenoid." Your initial recommendation to terry69jam is replacing a tranny. Was your later suggestion on replacement of the shift solenoid can be made in lieu of replacing a tranny? Does "pack" mean the shift solenoid? If yes, where can I find a replacement and how much would that cost? , I had a similar problem, it shifted weird, then the ATC system went on by itself and only reset after shutting off the car. I added lucas extender, then lucas fix transmission, and they did help, it shifts better and I have 101000 miles on it. the dealer wanted 3800 to replace with new trans. I couldn't afford that, so I chose to try lucas and have been happy. lucas fix trans is VERY thick, so drain more than you have to, mix trans fix with regular trans fluid then be patient while pouring it in. it is no guarantee, but it should help unless you have electrical issues. good luck , Hi, a 6ya Mechanic can help you resolve that issue over the phone in a minute or two. Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck! , po780 is a trans hydrolic systen code could be a shift solinoid gone bad have an experienced mechanic replace the lock-up controlle solenoid control solenoid valve/shift controlle solenoid valve "A" assembley and the A\T clutch pressure control solenoid valve "A"/"B" assembley start with these two parts farily inexpensive if this doesnt solve the problem then the trans needs to be replaced really expensive both of these parts are located on the out side of the trans rank my solution , u need to have the codes retrieved and take it from there, there are specific codes that need to be troubleshooted in order to diagnose it correctly...

By entering you agreed with our Terms of use and Privacy Policy.If you do not agree, please do not use this service or you will face consequences.
This site powered by Express JS, node.js, MongoDBand advanced javascript algorithm include all npm modules
Copyrighted © 2015