Detail: 2000 ford windstar driver side window quit working went down but won't come up can hear motor running but won't raise window
Solution: Window has fallen off track - inner panel of door has to be removed to provide access and reglue the glass into the tray with a good adhesive. , Hi, a 6ya Mechanic can help you resolve that issue over the phone in a minute or two. Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck! , If you handy, you most likely can repair this yourself. I have had this happen on two of my Auroras. The window regulators have a nylon part that retains the cable assembly. This part gets brittle as the car ages (really under designed) and the cable end pulls through it. I have been able to modify the retainer by removing the nylon cover and slicing a little notch to hold the end of the cable. Need a picture here to really show how it's done. In any case, a couple of hour labor and it's fixed for free. , It is most likely a wire that became disconnected at the switch, if neither windows work, it is likely a fuse. , Bad motor remove inner door panel to get to motor. Pretty easy. , replace the switch. They have parts made of plastic pressing on the contacts softing these babies up making them useless in a few years , My 2000 Ford expedition has the same click when I attempt to roll down the driver side window. I\'ve checked the fuses and they all appear to be in working order. If I press down on the driver side control and slightly tilt it back the window will work briefly. I gather that it is merely the switch.