Detail: Thread nut size: Towards front of car [M10 x 1, M12 x 1 Towards firewall [ M11 x 1.5, M13 x 1.5] All ports are on the driver side of the master cylinder
Solution: They go to the ABS system first then on to the wheel cylinders , Hi, a 6ya Mechanic can help you resolve that issue over the phone in a minute or two. Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck! , Still have air inside, because you used gravity feed method. , the size of socket ur looking for is 32mm & as for bearing i'm sure that its a complete bearing. , Air tools? good heavens. Just get some classic coca cola and wait. She goes loose left handed. But make sure you undo the fixing of the nut first (the way it is secured not to turn loose spontaineously). At some cars there is a split pin, Mazda had those deformable ones which you had to cut partially. (And new ones ready) , I already took care of the problem, Thanks for your concern.... Joe M........... , Our is a 44mm socket size........thought i would post it, since the above was stupid and didn't....can't find one in town.