SOLVED: Replacing front parking bulbs on opel corsa 2006

Detail: Replacing front parking bulbs on opel corsa 2006 model
Detail Question SOLVED: Replacing front parking bulbs on opel corsa 2006

Solution: Stephan, usualy the park lights on a Opel corsa Utility and up, is fitted with two screws on the inside of the bumper. you need to put your hand in at the back to unscrew it. , Hi, a 6ya Mechanic can help you resolve that issue over the phone in a minute or two. Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck! , wow i feel sorry for you because Cadillac designed this bulb to be a don't get to bulb but OK here's what you do take the bottom cover off or skid plastic panel under neath the front end theirs little plastic clips holding it on just get come dikes and don't cut them but just use it to help pull them out. after you get that off use a flash light and locate your light housing you should see two screws holding the house in i think those screws are 8mm i cant remember remove those two screws and be careful the metal from the bumper cuts you pull the light housing out and remove all the screws around the housing and open the housing up replace the bulb and make sure your contact to the bulbs clean and then reassemble the way you took apart. if you cant get it well then best bet is take it somewhere i know Cadillac charges an arm and a leg so you can go somewhere else. , have you replace the transmission fuse it on the cigar lighter circuit? , its behind the timing belt ,but i do not have any pictures . , You need to find the timing marks on both crank and cam pulleys, set it, then take of the belt ane dont let any pulley move! Put on new belt and set the tension of the belt. , Not sure here as to the type as some have a bolt in the block in line with the crank and special tool is used to locate TDC ,If the timing belt broke then you have bent valves anyway so the head will have to come off .If you reply with more details then i will advise how to do it with no timing marks also is this a common rail with just a high pressure pump or is it a intermediate with injector pump but the injectors having electronic sensor on one of the injectors if that makes sense to you

By entering you agreed with our Terms of use and Privacy Policy.If you do not agree, please do not use this service or you will face consequences.
This site powered by Express JS, node.js, MongoDBand advanced javascript algorithm include all npm modules
Copyrighted © 2015