SOLVED: Front end shakes 60 mph

Detail: Front end shakes 60 mph - Nissan Cars & Trucks
Detail Question SOLVED: Front end shakes 60 mph

Solution: Your tires may be unbalanced. Any difference in tire weight distribution around it's circumference, icreases as driving speed increases due to centrifugal force... that's why the problem may not be noticed at slower speeds. This condition may be felt on the steering wheel. Another possible cause is warped brake disks... it's possible this condition may be felt on both; steering wheel and brake pedal. , This problem is sometimes caused by a warped disk rotor. Hope this helps. , Hi, a 6ya Mechanic can help you resolve that issue over the phone in a minute or two. Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck! , have a tire shop balance your front tires. , You may have to get your wheels re ballanced if you lost one of the weight's on the rim. The other thing to is a bent rim if you hit a large pot hole or crub and last to see if the tire it self has funny wear patterns on the treads. Other things to look for if your wheels are ok. Check the ball joints Check the tie rod ends Check and pay attention to the Idler and Pitman arm. Your looking for any excessive movments A good way is to grease all that is mentioned above and see if the vibration is gone. Lost thing would be the brake rotors but you'ld now that by having vibrations throught out any speed when you apply the brakes to slow down. Good luck and hope this helps, you should be able to do this on your own other then checking the wheel ballance.  , There are a lot of things that can cause it to shimmey, and there is not enought room here to explane it all. My advise to you is to take it to a frontend alinement shop and have it chk. out, could be serious. , New revised calipers. and have the new rotors machined right out of the box before installing , could be a bent rim ? have you changed the universal joints? how about the tie rods and stabilizer bar

Latest Searches

By entering you agreed with our Terms of use and Privacy Policy.If you do not agree, please do not use this service or you will face consequences.
This site powered by Express JS, node.js, MongoDBand advanced javascript algorithm include all npm modules
Copyrighted © 2015